1. Boot Process Overview
Lesson Content
Now that we’ve gotten a pretty good grasp at some of the important components of Linux, let’s piece them altogether by learning about how the system boots. When you turn on your machine, it does some neat things like show you the logo screen, run through some different messages and then at the end you’re prompted with a login window. Well there is actually a ton of stuff happening between when you push the power button to when you login and we’ll discuss those in this course.
The Linux boot process can be broken down in 4 simple stages:
1. BIOS
The BIOS (stands for “Basic Input/Output System”) initializes the hardware and makes sure with a Power-on self test (POST) that all the hardware is good to go. The main job of the BIOS is to load up the bootloader.
2. Bootloader
The bootloader loads the kernel into memory and then starts the kernel with a set of kernel parameters. One of the most common bootloaders is GRUB, which is a universal Linux standard.
3. Kernel
When the kernel is loaded, it immediately initializes devices and memory. The main job of the kernel is to load up the init process.
4. Init
Remember the init process is the first process that gets started, init starts and stops essential service process on the system. There are three major implementations of init in Linux distributions. We will go over them briefly and then dive into them in another course.
There it is, the (very) simple explanation of the Linux boot process. We will go into more detail about these stages in the next lessons.
Exercise
Reboot your system and see if you can spot each step as your machine boots up.